BANDELIN SONOREX ZE 1031, Руководство по эксплуатации

Страница: 19 / 36

6486-001 GB/2021-04
19/36
Operation
/5
Information
– The ultrasound switches off automatically as soon as only the “0” LED is lit
up. In continuous operation, the green LED next to the ∞ symbol lights up con-
tinuously. The ultrasound does not switch off automatically.
– You can extend, shorten or switch off the sonication at any time.
– If you do not press a button for more than 12 hours, the ultrasonic bath will
be switched off automatically.
– The working temperature cannot be set. The current working temperature is
indicated by a flashing yellow LED, however.
– The red "!" LED will flash if the working temperature exceeds 40°C.
5.7 Degassing sonication fluid
Sonication fluid that has been freshly filled or left in the ultrasonic oscillating tank
must be degassed before use. Degassing the sonication fluid increases the effect
of the ultrasound.
• Cover the ultrasonic oscillating tank with the lid if available.
• Switch the ultrasound on for degassing. The degassing time is:
– Volume of sonication fluid up to 10 litres:
10 minutes
– Volume of sonication fluid over 10 litres:
30 minutes
Information
The ultrasound noise becomes quieter during degassing. This means that the
ultrasonic effect is increasing.
5.8 Adding goods to be treated
To achieve good results, observe the following information when inserting goods
to be treated:
• Each time before sonication, check whether the sonication fluid is contami-
nated. If there is visible contamination, replace the sonication fluid.
• The sonication fluid must be degassed. See chapter 5.7 Degassing sonication
fluid .
• The sonication fluid must be preheated to the required working temperature
before you add objects.
• Use suitable accessories, e.g. a basket. Do not place any objects directly on
the bottom of the ultrasonic oscillating tank. Use a studded silicone mat for
sensitive objects. See chapter 10 Accessories .
• Insert objects so they are distributed. Do not stack them. Sensitive objects
may not touch other objects.
• The ultrasound must be switched off while objects are being inserted.