B&C Technologies HP series, Инструкция по установке и эксплуатации

Страница: 29 / 39

27
Installation
External Chemical Supplies
The supply compartment on the HP-65 is
located on the front of the machine. Supply
cups can be accessed by opening the
dispenser lid. The supply cups can be
removed and filled as desired. Supply
compartments are numbered 1,2,3,4 and 5
from the left of the machine to the right for
the optional 5 cup system..
External supply connections for HP-65
washer-extractors are located on rear of the
machine at the vacuum breaker. Hose
connections should be made via the
supplied nipples or the flushing connection.
You must drill the nipples prior to use (max
1/4” bit). A ½ NPT connection is also
provided for flushing systems.
The supply compartment on the HP-125 is
located on the left side of the machine.
Supply cups can be accessed by opening
the dispenser lid. The supply cups can be
removed and filled as desired. Supply
compartments are numbered 1,2,3,4 and 5
from the rear of the machine to the front.
External supply connections for the HP-125
are located on top of the supply dispenser.
Hose connections should be made via the
strain relief. See figure.
HP-125 Strain Relief for
Supply Connections
HP-65 Supply Connections