manualshive.com logo in svg

BALZER Field Floater, Руководство по сборке

Поделиться
Скачать
BALZER Field Floater Скачать руководство пользователя страница 72

 72 

Testing 

5) 

Make sure to have oil in chain oiler reservoir and gearboxes This will ensure proper oiling of chain 

and gears. 

6) 

Extend upper auger by pushing button. Make sure to have clutch dis-engaged at this point. 

7) 

Rotate swivel head forward and backwards by moving joystick left and right. At this point use a 

second person to do a visual inspection of the gear and chain. Check for proper alignment. Always  
check this when the auger is fully extended. 

8) 

Verify spout opening and closing operation by moving joystick to IN and OUT position. Make sure 

the hydraulic lines have enough slack for movement in all positions. 

9) 

Use thumb rocker switch to open grain doors. Visually check to see if doors open fully. Use thumb 

rocker switch to close grain doors. Visually check to see if doors close fully. To adjust opening and 
closing adjust screw on joystick for fine adjustment. For large adjustments adjust set-screw on hydraulic 
block. 

10) 

Engage PTO and pull trigger on joystick to engage clutch to operate unload auger. 

GREEN 

indicator light will illuminate. Visually verify auger rotation. Use trigger to dis-engage clutch. 

GREEN 

light will be extinguished. Decrease PTO speed and dis-engage PTO. Lower auger into saddle. Close 
valves on drip oiler. 

11)

 Attach hydraulic hoses for Load Leveling System. Pressurize the Load Leveling System until the 

hydraulic cylinders are at half stroke. Remove hydraulic hoses and store. 

12) 

Check steering function by maneuvering cart with tractor hydraulic lever for steering function in the 

float position. Maneuver cart in a zig zag motion and watch to see if wheels are steering to follow tractor 
movement. Continue by making a ninety degree turn and at the end of the turn return tractor hydraulic 
lever to engaged position. Wheels should snap back to straight position. 

13) 

If grain cart is equipped with brakes, engage hydraulic lever for braking function and watch pressure 

gauge to see if pressure increases. Functionality can also be judged by applying brakes while cart is in 
motion to see in the grain cart slows down the tractor. 

14) 

After testing is complete check all bolt to ensure proper tightness. Also check to see is all gear are 

aligned correctly at this time. Once this is done assemble all safety shields . 

 

Содержание Field Floater












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды