Balzano ZKX40A1, Руководство пользователя

Страница: 13 / 16

D. Other Operation instruction
Oven Lamp – this lamp will be ON for 3 minutes when the oven is opened or after any cooking is
finished
Time-Delay – you can delay the startup of cooking up to 24 hours. Before setting up process, press
Setting key, the time display column will flash. You can set the desired startup time (see “C. Setting
Time and Temperature” section). Please note that once press the Setting key, it can be cancelled by
pressing ON/OFF key.
Cooking time adjustment – you can adjust the duration (minute only) during cooking. When it’s
cooking, press the Setting key, the time display column will flash, then press Selection key to adjust
the minute column from 1 to 59 (see “C. Setting Time and Temperature” section)
Backwards of setting – during the setting of menu/time/temperature process, press BACK key, the
setting stage will return to previous one.
Cancel / Stop – during any process or setting, press ON/OFF key, the setting / operation is cancelled,
the appliance returns to standby status.
Overtime function – you can add the duration once cooking is finished. When a cooking menu is
finished, the display will show END. You can add cooking time (1-59mins only) with same cooking
function and set temperature. Simply press the Setting key, this icon
will flash, then press
Selection key to set the additional time (up to 59 mins) (see “C. Setting Time and Temperature”),
confirm by press the ENTER key, the appliance will start and begins countdown.
Pause of operation – during operation, the appliance will pause when the ENTER key is pressed.
This will stop the timer countdown, the time display column is flashing. Press the ENTER key again,
the appliance will resume and continue the operation until the cooking is completed.
Clearing Water Scale
1. If you realize that the steam emission is slower than before or not as smooth, or if the steam is
found to have white powdery residues, try adding citric acid or white vinegar to the storage tank,
and then start the steam oven to remove the scale from the pipe. After performing these steps,
normal operation should resume. If the amount of water scale is too high, perform this
procedure repeatedly. After the procedure(s), it is recommended to run the oven once with
pure water.
2. If the product does not emit steam at all, it is likely that the pipe has been seriously clogged due
to excessive accumulation of scale, so the steam is unable to pass through. Contact the
maintenance personnel for repair as soon as possible.
3. It is recommended that the user performs the above-mentioned descaling procedure every one
and a half to two months.