baltur TS 0 GN, Инструкция по эксплуатации

Страница: 11 / 96

9
HYDRAULIC DIAGRAM TO THE BURNERS
GI 1000 - TS - PYR SERIES OPERATING WITH
LIGHT OIL OR HEAVY OIL WITH MAX NOMINAL
VISCOSITY 5 °E AT 50 °C
N° BT 8868/2
rev. 01/06/01
1 - Filter
2 - Circulation pumps (one spare)
3 - Burner pushing central station
4 - By pass (normally closed)
5 - Pressure regulator adjustable from 0,5 to 2 bar
6 - Pressure gauge (0 ÷ 4 bar)
7 - Main tank
8 - Oil heating at steam or at hot water in order to keep,
also during a short period of non operation, a temperature
value sufficient for the flow in the piping
N° BT 8866/4
rev.31/05/01
HYDRAULIC DIAGRAM FOR BURNERS GI 1000 - TS - PYR SERIES
OPERATING WITH HEAVY OIL (50°E AT 50°C) WITH AUXILIARY HEATER
1 - Filter
2 - Circulation pumps (one spare)
3 - Starter resistance with thermostat
4 - Burner pushing central unit
5 - Pressure regulator (from 0,5 to 3 bar)
6 - By pass (normally closed)
7 - Steam or hot water coil to heat oil
8 - Auxiliary heater
9 - Main tank
10 - Steam orhot water heating to keep the oil at a
temperature at which it can flow through the pipes,
even while the machine is down
11 - Degasifier (Ø = 100 - H = 300)
12 - Pressure gauge (0 ÷ 4 bar)
13 - Thermometer
Electric heating wires