baltur 35560010, Инструкция по установке, использованию и обслуживанию

Страница: 38 / 64

TECHNICAL SPECIFICATIONS
MODEL TBL 18 TBL 26 TBL 35
Minimum flow rate
Kg/h
7.6 13 15.1
Maximum flow rate
Kg/h
17.7 26.1 32.9
Minimum thermal power
kW
90 155 180
Maximum thermal power
kW
210 310 390
³) emissions
mg/kWh
Class 2 Class 2 Class 2
Viscosity 1.5° E - 20° C 1.5° E - 20° C 1.5° E - 20° C
Operation Single-stage Single-stage Single-stage
50hz transformer 26 kV - 48 mA 26 kV - 48 mA 26 kV - 48 mA
50hz fan motor
kW
0.25 0.37 0.37
50Hz single-phase electrical data
1N - 230V - 2,06A -
0,475kW
1N - 230V - 2,98A -
0,686kW
1N - 230V - 2,98A -
0,686kW
Protection rating IP40 IP40 IP40
Control box LMO 14… LMO 14… LMO 14…
Flame detection Photoresistor Photoresistor Photoresistor
Operating ambient air temperature
°C
-15 ÷ +40 -15 ÷ +40 -15 ÷ +40
Sound pressure**
dBA
73 76 74
Sound power***
dBA
85 88 86
Weight with packaging
kg
22,5 23 26
Weight without packaging
kg
17,5 18 21
Classes defined according to EN 267 standards.
Calorific power below reference conditions 15° C, 1013 hPa (mbar):
Diesel fuel: Hi = 11.86 kWh/kg = 42.70 Mj/kg
The measurements have been carried out in accordance with EN 15036 - 1 standard.
** The acoustic pressure measured with burner operating at maximum rated thermal output refers to the manufacturer's laboratory environment
conditions and cannot be compared to measurements carried out in different locations. Measurement accuracy σ = +/- 1.5 dB(A).
*** Acoustic pressure was obtained characterizing the manufacturer's laboratory with a sample source; this measurement has a class 2
accuracy (engineering class) with a standard deviation of 1.5 dB(A).
³) DIESEL EMISSIONS
Classes defined according to EN 267 standards.
Class NOx emissions in mg/kWh diesel fuel CO emissions in mg/kWh diesel fuel
1 ≤ 250 ≤ 110
2 ≤ 185 ≤ 110
3 ≤ 120 ≤ 60
STANDARD ACCESSORIES
MODEL TBL 18 TBL 26 TBL 35
Burner coupling flange gasket 1 1 1
Stud bolts N°4 M10 N°4 M10 N°4 M12
Hexagon nuts N°4 M10 N°4 M10 N°4 M12
Flat washers N°4 Ø10 N°4 Ø10 No. 4 Ø12
Insulating cord 1 1 1
Hoses N°2 - 1/4" x 3/8" x 1200 N°2 - 1/4" x 3/8" x 1200 N°2 - 1/4" x 3/8" x 1200
Filter 3/8" 3/8" -
Nipple/s N°2 - 1/4" x 1/4" x 25
N°2 1/4" x 1/4" x 25 - N°2
3/8"
N°2 1/4" x 1/4" x 25
Nozzles 1 1 1
7-pole connector 1 1 1
6 / 30
0006160431_202112
ENGLISH