Balogh MOL81 485 1312, Руководство пользователя

Страница: 17 / 20

MOL81 485 1312/MOL81 485 1337
MOL81 485 1312-MOL81 485 1337-UM-1.4-EN 17/20
8.2 Connector for cable assembly
The connector for the cable belongs to the SOURIAU UTO series, size 12, with 8 pins
The socket connector references are:
- Shell: UTO6128SH
- Socket contacts: RC16M23K (e.g. for wires of 0.5mm
2
to 1.5mm
2
(AWG16 to AWG20))
- Hood and cable-gland: UTOS12JCSL (long version for cables from
∅
13,5 to 18mm).
These references are examples, please check with the manufacturer for availability.
The socket contacts must be chosen according to individual wire size gauges. The above reference is for wire
sizes from 0.5mm2 to 1.5mm2 (AWG16 to AWG20). See SOURIAU documentation for other references.
The hood for the female socket must be chosen according to the outside diameter of the cable. The above
reference is for cable sizes from 8mm to 12.5mm. See SOURIAU documentation for other references.
8.3 Type of cable to use
The cable to be used must be shielded with the following characteristics
:
•
6 wires:
- Power : 2 wires
- Serial link RS485 : 1 twisted pair 120 Ω
(*)
- Outputs : 2 wires
- Shield : 360° contact to connector
•
Wires are connected using crimping; wire cross-section: 0.5 to 1.5 mm²
•
Outside cable diameter: 8 to 12.5 mm
•
Max length for RS485 cable: 1200 m.
•
Max length for power supply cable : 100 m.
----------------------------------------------------------------------------
(*) MOL81 485 line termination to be connected if necessary, pins B to E.