Balluff BVS SC 1280Z00-07-000 Series, Руководство пользователя

Страница: 20 / 35

20
BVS SC-_1280Z00-70-000
SMART
CAMERA
IO
3.4.4 I/O light
The I/O light interface provides 24 volt and two I/O signals (I/O 6 & I/O 7). These I/Os, similar to the two I/Os at the power
plug connectors (see “Power” on page 16), are equipped with a push-pull output stage and a PNP input.
I/O 6 & I/O 7 (I/O light plug connectors)
Operation as input
Voltage Signal 0
0 to 5 V < 2 mA
Signal 1 11 to 30 V 2 to 5 mA
Delay 0
→ 1 < 160 μs
1
→ 0 < 160 μs
Operation as output
Voltage Signal 0
0 V (+V
D
) 100 mA max.
Signal 1 24 V (V
DC
– V
D
) 100 mA max.
Voltage drop V
D
< 2 V
Delay 0
→ 1 < 10 μs
1
→ 0 < 10 μs
Supply voltage output
Voltage V
P
24 V (V
DC
- V
D
) 1.2 A max.
Voltage dropV
D
< 2 V
Among other things, this makes it possible to easily connect lighting equipment to the SMARTCAMERA . Either the per-
manent voltage supply or the I/O signals can be used for this purpose.
The following example shows how the ring lighting BAE LX-VS-RR100 can be connected with trigger and boost.
The ring lighting is equipped with a M12 plug, so that it can be connected directly with the SMARTCAMERA. A complex
wiring is not necessary.
Naturally, other sensors/actuators can also be connected, the corresponding switching examples are located in the de-
scription of the power plug connector (see “Power”).