Balluff BVS HS-QB, Быстрое руководство

Страница: 35 / 64

BVS HS-QB
Handheld Barcode Reader with Bluetooth®
www.balluff.com
11
Reading Parameters
35
11 Reading Parameters
Point the reader at the target and pull the trigger to enable the aiming
system and the illuminator (red beam) to decode the barcode label. The
aiming system will briefly switch off during the acquisition time and if no
code is decoded will switch on again before the next acquisition. The
illuminator will remain on until the symbol is decoded.
As you read code symbols, adjust the distance at which you are hold-
ing the reader.
11.1 Aiming System
A number of options for customizing control of the Aiming System are
available. See the OPM for more information and programming bar-
codes.
11.2 Good Read Green LED Spot Duration
Successful reading can be signaled by a good read green spot.
Use the barcodes below to specify the duration of the good read
pointer beam after a good read.
GOOD READ GREEN SPOT DURATION
ENTER/EXIT PROGRAMMING MODE
Green Spot Duration = Disable (Green Spot is Off)
¨ Green Spot Duration = Short (300 msec)
Green Spot Duration = Medium (500 msec)
Green Spot Duration = Long (800 msec)