Balluff BVS HS-QB, Быстрое руководство

Страница: 21 / 64

BVS HS-QB
Handheld Barcode Reader with Bluetooth®
www.balluff.com
6
Linking the Reader
21
6 Linking the Reader
6.1 Link Balluff RF Devices to Base
For RF devices, before configuring the interface it is necessary to link
the handheld with the base.
To link the handheld and the base, press the trigger to wake up the
handheld and mount it into the base. If the reader was previously linked
to another base, you must first press and hold the button on the base
(>5 seconds), then scan the
Unlink barcode before re-linking to the
new base.
6.2 Linking to a Bluetooth Adapter in Serial Port Profile Mode
1 Install any drivers provided with the Bluetooth adapter.
2 Scan the Enable RF Link to Server label below to make the
scanner visible to the host computer.
3 Use the host computer’s Bluetooth manager to “Discover new
devices” and select "Balluff Scanner." If you receive an error mes-
sage, it may be necessary to disable security on the device.
4 Use an RS-232 terminal program to see incoming data on the port
designated by the computer's Bluetooth manager.
Unlink
Enable RF Link to Server