Balluff BVS HS-QB, Быстрое руководство

Страница: 24 / 64

BVS HS-QB
Handheld Barcode Reader with Bluetooth®
7
Programming
24
7 Programming
The reader is factory-configured with a set of standard default features.
After scanning the interface barcode from the Interfaces section, select
other options and customize your reader through use of the program-
ming barcodes available in the Operational Manual (OPM) (available on
the Balluff website).
7.1 Using Programming Barcodes
This manual contains barcodes which allow you to reconfigure your
reader. Some programming barcode labels require only the scan of
that single label to enact the change.
Other barcodes require the reader to be placed in Programming Mode
prior to scanning them. Scan an ENTER/EXIT barcode once to enter
Programming Mode; scan the desired parameter settings; scan the
ENTER/EXIT barcode again to accept your changes, which exits Pro-
gramming Mode and returns the reader to normal operation.
7.2 Configure Other Settings
Additional programming barcodes are available to allow for customizing
programming features, if your installation requires different program-
ming than the standard factory default settings. Reference the OPM for
more information.
7.3 Resetting Standard Product Defaults
Reference the OPM for a listing of standard factory settings. If you
aren’t sure what programming options are in your reader, or you’ve
changed some options and want the factory settings restored, scan
the barcode below to copy the factory configuration for the currently
active interface to the current configuration.
NOTE
Factory defaults are based on the interface type.
Configure the reader for the correct interface
before scanning this label.
Standard Product Default Settings