Balluff BVS HS-QB, Быстрое руководство

Страница: 31 / 64

BVS HS-QB
Handheld Barcode Reader with Bluetooth®
www.balluff.com
10
Selecting the Base Interface Type
31
10 Selecting the Base Interface Type
Upon completing the physical connection between the base and its
host, proceed directly to Interface Selection below for information and
programming for the interface type the base is connected to (for exam-
ple: RS-232, Keyboard Wedge, USB, etc.) and scan the appropriate
barcode to select your system’s correct interface type.
10.1 Interface Selection
The base will support the following host interfaces:
- RS-232
- USB
For defaults and additional information associated with each interface,
proceed to the corresponding chapter in the BVS HS-QB reader OPM.
10.1.1 Configuring the Interface
Scan the programming barcode which selects the appropriate interface
type for the system the reader will be connected to.
NOTE
Unlike some other programming features and
options, interface selections require that you scan
only one programming barcode label. DO NOT
scan an ENTER/EXIT barcode prior to scanning
an interface selection barcode.
Some interfaces require the scanner to start in a
disabled state when powered up. If additional
configuration is desired in this state, pull the trig-
ger and hold for 5 seconds to change to a state
that allows programming with barcodes.