Balluff BTL7-P511-M J-DEXC-TA12 Series, Руководство пользователя

Страница: 7 / 182

Certificate: 2411253
Project: 70099158
Master Contract: 252588
Date Issued: 2016-11-23
DQD 507 Rev. 2016-02-18 Page 3
CSA C22.2 No. 142-M1987 Process Control Equipment - Industrial Products
CAN/CSA-C22.2 No. 60079-0:07 Electrical apparatus for explosive gas atmospheres – Part 0: General
requirements
CAN/CSA-C22.2 No. 60079-1:07 Electrical apparatus for explosive gas atmospheres – Part 1: Flameproof
enclosures "d"
CAN/CSA-C22.2 No. 60529:05 Degrees of protection provided by enclosures (IP Code)
FM 3600-1998 Electric Equipment for use in Hazardous (Classified) Locations General
Requirements
FM 3615-2006 Explosionproof Electrical Equipment - General Requirements
FM 3810-2005 Electrical Equipment for Measurement, Control and Laboratory Use
ANSI/ISA-60079-0 (12.00.01)-2009 Explosive atmospheres – Part 0: Equipment – General Requirements
ANSI/ISA-60079-1 (12.22.01)-2009 Explosive Atmospheres - Part 1: Equipment Protection by Flameproof
Enclosures “d”
ANSI/UL 50, 12 th Ed. Enclosures for Electrical Equipment, Non-Environmental Considerations
ANSI/UL 50E, 1
st
Ed. Enclosures for Electrical Equipment, Environmental Considerations
ANSI/IEC 60529-2004 Degrees of protection provided by enclosures (IP Code)
MARKINGS
MARKINGS
The manufacturer is required to apply the following markings:
x
Products shall be marked with the markings specified by the particular product standard.
x
Products certified for Canada shall have all Caution and Warning markings in both English and French.
Additional bilingual markings not covered by the product standard(s) may be required by the Authorities Having
Jurisdiction. It is the responsibility of the manufacturer to provide and apply these additional markings, where
applicable, in accordance with the requirements of those authorities.
The products listed are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and
US (indicating that products have been manufactured to the requirements of both Canadian and U.S. Standards) or
with adjacent indicator 'US' for US only or without either indicator for Canada only.
Nameplate adhesive label material approval information:
The following markings are provided on a 0.018” (0.45mm) thick Stainless Steel nameplate. Nameplate is affixed
to the cover of the enclosure by two M3 by 5mm screws and recessed on the cover to prevent edges from being
bent.
x Manufacturer’ s name: "Balluff Inc. ", or CSA Master Contract Number “252588”, adjacent to the CSA Mark in
lieu of manufacturer’s name.