Balluff BTL7-A50 Series, Руководство пользователя

Страница: 36 / 114

12 english
4.5 Shielding and cable routing
Defined ground!
The BTL and the control cabinet must be at the
same ground potential.
Shielding
To ensure electromagnetic compatibility (EMC), observe
the following:
– Connect BTL and controller using a shielded cable.
Shield: Braided copper shield with minimum 85%
coverage.
– Connector version: Shield is internally connected to
connector housing.
– Cable version: On the BTL side, the cable shielding is
connected to the housing.
Ground the cable shielding on the controller side
(connect with the protective earth conductor).
Magnetic fields
The position measuring system is a magnetostrictive
system. Ensure that there is sufficient distance between
the BTL, holding cylinder and strong, external magnetic
fields.
4
Installation and connection (continued)
Cable routing
Do not route the cable between the BTL, controller, and
power supply near high voltage cables (inductive stray
noise is possible).
The cable must be routed tension-free.
Bending radius for fixed cable
The bending radius for a fixed cable must be at least five
times the cable diameter.
Cable length
BTL7-A/G Max. 20 m
1)
BTL7-C/E Max. 50 m
1)
Tab. 4-6: Cable lengths BTL7
1)
Prerequisite: Construction, shielding and routing preclude the effect of any
external noise fields.
4.4.2 Connector S135
S135
Pin
BTL7-… interface
Fig. 4-12: Pin assignment of S135
connector (view from above on
BTL), 6-pin M16 circular plug
-A504 -G504 -C504 -E504
1 0…10 V
1) –
10…10 V
1)
0…20 mA
1)
4…20 mA
1)
2 0 V
3 La (communication line)
4 Lb (communication line)
5 10…30 V
6 GND
2)
Tab. 4-4: Connection assignment BTL7-A/C/E/G504-…-S135
S135
Pin
BTL7-… interface
Fig. 4-13: Pin assignment of S135
connector (view from above on
BTL), 6-pin M16 circular plug
-A505 -G505 -C505 -E505
1 10…0 V
1)
10…
–
10 V
1)
20…0 mA
1)
20…4 mA
1)
2 0 V
3 La (communication line)
4 Lb (communication line)
5 10…30 V
6 GND
2)
Tab. 4-5: Connection assignment BTL7-A/C/E/G505-…-S135
1)
Factory setting, can be freely configured with the PC software.
2) Reference potential for supply voltage and EMC-GND.
BTL7-A/C/E/G50_-M_ _ _ _ -T_2/3-S32/S135/KA_ _/FA_ _
Magnetostrictive Linear Position Sensor – Rod Style