Balluff BOS R254K-UUI-RH10-S4, Руководство по настройке

Страница: 191 / 214

www.balluff.com 83 english
6.13 Vibration
6.13.1 Description
The device makes available two vibration values, which
provide valuable information for preventive maintenance:
– Total speed in [mm/s], which indicates the general
machine state (lower frequency range)
– Total acceleration in [g], which indicates the bearing
state (higher frequency range)
This secondary device function allows the measurement of
the vibration speed as a property of the physical
surroundings of a mechanical system. The primary goal is
to detect significant changes or deviations of the vibration.
The device sends messages if adjustable limit values are
exceeded.
Primary characteristics:
Output Value Vibration Level
Unit mm/s
Vibration frequency
range
10...1000 Hz
Measurement
range
1)
0…1770 mm/s
Detectable range of
the vibration
acceleration
0...16 g
Measurement error ±10%
1)
The vibration velocity range is frequency-dependent. The specified
value is the theoretical maximum within this frequency range at an
acceleration of 16 g.
Tab. 6-61: Vibration detection – Primary characteristics
6.13.2 Mathematics/Algorithm
The example in Tab. 6-62 shows a typical application of
vibration monitoring.
Application example (with vibration
frequency spectrum) as input
Total result of the
measurement as
output
Description
Vibration level v-RMS
[mm/s]
A classic application is the detection of the
wear of a bearing.
2.3
The spectrum and the amplitude of the
vibration change.
4.5
A more complex mechanical system (such
as a production line) returns more complex
measurement results (spectrum).
7.1
The output value is a total value for simple
handling.
Tab. 6-62: Classic application – Detection of vibration changes
6
Secondary Device Functions (continued)
BOS R254K-UUI-RH10-S4
Photoelectric Sensors