Ballu Plaza Ext Series, Руководство по эксплуатации

Страница: 9 / 16

Installation 9
The device can be fixed on the bracket as follows:

screw two fixing screws at the top into the
latches on the bracket;

put the lower part of the convector on the
bracket using the special holes on the lower part of
the convector;

put the upper part of the convector on the
bracket by fixing it with the latches on the bracket.
Fig. 9
2. Floor mount (stand fixing). Read the mounting
diagram below use the stands and rollers from the
delivery set and install the device on the floor.

turn the convector upside down;

take one of the stands with the rollers;

apply the plate of the stand to the place of fixing
on the convector so that the convex part of the
plate tightly joined the convector case: the screw
hole should match;

fix the stand using the special plastic half-turn fix
included in the delivery set;

do the same with the second stand.
Fig. 10
Electrical diagram
Fig. 11
Service life
The service life of the heater is 10 years.
Storage
• Before storage arrangements ensure the heater is cool.
• If the heater is not intended for use for a long time it is
recommended to clean it and put for storage (preferably in
the factory package) in a cool dry place.
Date of manufacture
The date of manufacture is on the package.