Ballu KF-25GWE, Руководство по обслуживанию

Страница: 44 / 63

KFR-3301GE KFR-3201GE
11. DISASSEMBLY INSTRUCTIONS
43
1
.
Remove the grille
1) Open the screw cover of the grille.
2) Take out the screws of the grille.
3) Hold both sides of the grilleand drag it towards oneself,
shown the operation switching board of the indoor unit.
2 . Remove the electrical control box
1) Remove the cover of the electrical control box
2) Take the indoor coil sensor from the sensor bracket.
3) Remove the switching board.
4) Take out the screws of the terminal board and remove the
terminal board.
5) Disconnect the circuitry of the printed circuit board.
6) Remove and check-up the printed circuit board.
7) Disconnect all the connectors of the electrical control box.
8) Take out the screws of the electrical control box and
remove the electrical control box.
Screws
Front Panel
Terminal Board
Screws
Screw
Sensor Bracket
3 . Remove the installation plate
1) Take out the screws of the installation plate.
2) Remove the installation plate.
Installation Platel
Printed Circuit Board
Screw
KFR-2501GE KFR-33GE KF(R)-25GE KF-34GE
OPERATION PROCEDURE PHOTOS