Ballu KF-25GWE, Руководство по обслуживанию

Страница: 31 / 63

7.CONTROL MODE
30
Note: This manual is for the fixed-speed series split type air conditioners, including the models KFR-33GWE,
KFR-25GWE, KFR-2501GWE, KFR-3301GWE, KFR-3201GWE, KF-25GWE, KF-34GWE, KF-5002GWE ,
KFR-4801GWE.
Control Unit's Feature
1. Display panel
1.1 Description of pattern
1.2 The display screen consists of 4 LEDs, indicating power, time set, operation and high power respectively.
1.3 Power indicator. When the air conditioner runs, the power indicator lamp lights up;Compressor operation
indicator. When the compressor runs, the operation indicator lamp lights up;
1.4 Timer indicator. When the timer function works, the timer indicator lamp lights up;
1.5 High power indicator. When the air conditioner works in the high efficient mode, the high efficient indicator
lamp lights up.
2. Temporary Switch
2.1 Press the temporary switch to start the unit, and press it once again to stop the unit; the control unit makes a
judge according to the room temperature to select the corresponding run mode. Once a run mode is selected, it
will not be changed unless the unit is cut off and powered on again.
A.When the room temperature 26 , the unit starts in the cooling mode; the indoor controlled
temperature is set at 26 , and the indoor fan speed is set to automatic mode;
B. When the room temperature 23 , the unit starts in the heating mode; the indoor controlled
temperature is set at 23 , and the indoor fan speed is set to the automatic mode;
C. When 23 the room temperature 26 , the air blowing mode starts, and the indoor fan speed is
set to automatic;
2.2 When the air conditioner is powered on, hold down the temporary switch for 5 seconds or longer,
the control unit starts the test operation, when the system is forced to run in the cooling mode
regardless of the room temperature.
°Ñ
°Ñ
°Ñ
°Ñ
°Ñ
°Ñ