Baldwin Boxall OmniCarePLUS Multi-Exchange EVC, Руководство по установке

Страница: 22 / 54

OmniCarePLUS Multi-Exchange EVC
Installation Instructions
12
OmniCarePLUS issue 1
3.2 L
OCAL
C
ONTROL
P
OINT
I
NSTALLATION
3.2.1 Remote Unit Installation and Connection
Please refer to the Omnicare Installation Manual for details on
installing Remote Units.
3.2.2 Control Panel Installation (OmniCare Site
Cabling)
Please refer to the OmniCare Installation Manual for details on
installing the Local Control Points (control panels).The
OmniCare manual provides details on site cabling for loop cables.
3.2.3 Battery Box Installation
The Local Control Point will be supplied with a Battery Box, the
size depends on the batteries required. For dimensions and
mounting holes please refer to “Addendum” on page 39. These
are normally installed close (i.e underneath or adjacent to) the
Local Control point and come supplied with suitable cables.
Please refer to the OmniCare Installation Manual for mounting
details of the battery boxes (BVOBATT & BVOBATT2).
If for any reason the battery box must be located remotely from
the Local Control point then additional cabling and fuses will be
required. To meet the requirements of BS5839-9 there will need
to be an additional pair of cables between the battery box and
local control point. These pairs must be wired disparately from
each other, and both pairs of cables must be fused at both ends.
3.2.4 Delayed Call Output
The Delayed Call output feature is not available on Omnicare
Plus.