Baldwin Boxall OmniCarePLUS Multi-Exchange EVC, Руководство по установке

Страница: 12 / 54

OmniCarePLUS Multi-Exchange EVC
Installation Instructions
2
OmniCarePLUS issue 1
1.2 T
ECHNICAL
S
PECIFICATIONS
Please refer to the OmniCare installation Manual for the majority
of Technical Specifications. Where there are OmniCarePLUS
specific items they will be detailed within this manual.
1.2.1 Local Control Panels
Control Panels
System self-monitoring BS5839 compliant
Remote signalling of fault Volt-free contact, closing/opening set on installation
Indicators Occupied, call, fault, power, charger, speech level
Transmission capability Half-duplex (DRS remotes) either voice switched or by
PTT (controlled at the Control Panel).
Full Duplex (Fire Telephones)
Power supply 110V / 230V AC autoswitching, battery backed with built
in batteries & charger
Power consumption (VA) 10VA + 1VA per remote connected
Dimensions (W x H x D) 410mm x 455mm x 200mm (8-64 way)
Bezel dimensions (W x H x D) 461mm x 506mm x 25mm (8-64 way)
Bezel Cutout dimensions W x H 420mm x 465mm (8-64 way)
Knockouts
20mm diameter in top and top/rear
Security Lockable glazed door
Weight (not including batteries) 26kg (8-64 way)
Temperature Range
-10 to +30°C (storage and operating)
Humidity Range 95% Non Condensing
Network Connections Either Copper (4 cores) or Fibre (single or multimode)
Figure 1.1 — Typical OmniCarePlus Local Control Panel