Baldan DCF-CO, Инструкция по эксплуатации

Страница: 61 / 122

Instruction Manual
DCF-CO 61
The distance between strokes must be well observed by the operator for a homogeneous
distribution throughout the area. However, during the work, a variation up to 25% in the amount
distributed between strokes is accepted.
Overlapping is covering a product being distributed to the edge of the track immediately
before the current track, this is done to compensate for the distribution deficiency tha occurs
naturally at the edges.
ƒ
Operations
• Distance between strokes
• Overlapping
Do not perform adjustments while the DCF-CO is in motion or with an
active transmission.
ATTENTION
OVERLAPPING
AREA
DIST
AN
CE BE
TWE
EN
STROKE
S
Keep people and animals clear during work.
ATTENTION
We do not recommend increasing
the distance between strokes.
IMPORTANT
We recommend a distance
of 7 meters between strokes
for the distribution og dry
limestone and gypsum. For
organic compound, the distance
between strokes may vary
according to the type of organic
compound.