Baldan DCF-CO, Инструкция по эксплуатации

Страница: 100 / 122

Instruction Manual
DCF-CO 100
ƒ
Maintenance
• Crown and pinion replacement (Reduction gearbox) - Part III
5
13
7
6
After changing the crown shaft and the pinion worm gear, fill the
reduction gearbox with oil as instructed on page 83. Then, couple the
reduction gearbox to the DCF-CO as instructed on pages 55 and 56.
ATTENTION
2
3
14
4
1
2
When the reduction gearbox assembly (2) is finished if the
smaller cover (5) and large cap (1) have gaps, replace the paper
gaskets (13 and 14).
IMPORTANT
07 - Then, couple the paper gaskets (13) and the smaller cover (5)
to the reduction gearbox (2) securing through the screws (6)
and lock washers (7).
08 - Finish by coupling the paper gaskets (14) and the large lid (1)
of the reduction gearbox (2), securing them through the
screws (3) and lock washers (4).