Balcrank Director Jr. 3110-031, Руководство по эксплуатации, установке, обслуживанию и ремонту

Страница: 12 / 18

Totalizer Operation
The totalizer will accumulate and display the pulses received on the count input terminals. The Totalizer is
factory preprogrammed with a decimal value of 0.1, but it displays only the whole number accumulations that
are also indicated on the dispense counter (e.g. 120.3 on the dispense counter = 120 on the Totalizer). Count
capacity is 8 digits. To read the total, press and hold “TOTAL”.
Key lock Operation
The Director Jr. is equipped with a security key lock to enable the system. The key must be inserted and
turned to the ON position (12 o’clock position) to enable dispensing. The Director Jr. should have power
applied prior to turning on the key lock switch to assure that the controller is initialized.
Ready Light Operation
The Director Jr. is equipped with a red light to indicate when the dispensing system is armed and ready for
dispensing. If the light is not illuminated then the system is not operational.
Station Rotary Switch Operation
The Station Rotary Switch controls the station which is authorized to dispense the preset amount. Stations
are numbered 1 through 10.
Example
Assume that the operator of station 3 wants to add 4 quarts of oil to a car. He contacts his supervisor who will
enable the Director Jr. to meter the required oil. The supervisor would perform the following steps:
1. Assure that the Director Jr. has power.
2. Push in and turn the key lock switch to the ON position.
3. Turn the station rotary switch to the number 3 position.
4. Push “SET”.
5. Push “SELECT” button until the second digit is flashing. Use the adjust the digit to 4 using the up arrow.
6. Push “SET” and the ready light will illuminate and the operator in station 3 is enabled.
7. The operator in station 3 dispenses the fluid. The counter decreases in tenths and the totalizer increases in
whole numbers.
8. When the counter reaches 0.0, then the ready light turns off and dispensing is complete.
9. Turn off the key lock switch to prevent further unauthorized dispensing.
Emergency Stop
In the event that the fluid flow must be stopped immediately due to leakage or other emergency situation,
TURN OFF THE KEY LOCK SWITCH . This action shuts off the solenoid valve which stops the flow of fluid.
Simply unplugging the Director Jr. will not provide emergency shutoff.
Reset
If the amount of delivery needs to be changed or corrected after “SET” has been pressed or after flow of fluid
has already started, press zero and start over. If some fluid has already been dispensed, that amount should
be subtracted from the new setting.
11