Page 14
Press "Jets1" button
to
exit
the
programming mode.
reset the filter start time.
Press “Mode/Prog” to see
“SET STOP FILTER 1
” and
adjust as done above.
Same process as to
“SET START FILTER 2
”
and
“SET STOP FILTER 2
”
Jets/Jets1/Jets2/Jets3/Jets4 (If equipped)
Press the button once to turn the water pump on. Press the button a second time to
turn the water pump off. And to shift between low and high speeds if it is a two-speed
pump.
NOTE: If left running, the water pump will automatically turn off after 15 minutes.
Blower (If equipped)
Press the button once to turn the blower on. Press the button a second time to turn the
blower off.
NOTE: If left running, the blower will automatically turn off after 15 minutes.
Aux (If equipped)
Press the button once to turn the aux device on. Such as blower or pump. Press the
button a second time to turn it off.
NOTE: If left running, the aux equipment will automatically turn off after 15 minutes.
Light
Press the "Light" button to turn the spa light on or off. To select a specific color, simply
press the "Light" button to turn off the spa light, immediately press it again to change
the spa light to the next color selection. Continue until the desired color is reached.
NOTE: If the spa light is left on, it will automatically turn off after 4 hours.