Balboa Water Group SpaTouch2, Руководство пользователя

Страница: 19 / 28

Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compatible with SpaTouch 1 & 2
19 03.17
Utilities
The Utilities Icon on the Settings Screen takes you to the
Utilities Screen. The Utilities Screen contains the following:
Panel
Touching the Panel Icon on the Utilities Screen takes you to the
Panel Screen, where you can set how long it takes the panel to
go to sleep after the last activity. The Sleep Timer can be set
from 1 minute to 60 minutes. The default is 30 minutes.
Demo Mode
Demo Mode is not always enabled, so it may not appear. This is
designed to operate several devices in a sequence in order to
demonstrate the various features of a particular hot tub.
Fault Log
The Fault Log is a record of the last 24 faults that can be reviewed
by a service tech. Use the Up and Down buttons to view each of
the Faults. When Priming Mode shows in the Fault Log, it is not a
fault. Rather, it is used to keep track of spa restarts.
GFCI Test
(Feature not available on CE rated systems.)
Your systems may have GFCI configured in one of three ways:
1. GFCI test is not enabled
2. Manual GFCI test is enabled but automatic
GFCI test is not enabled
3. Both manual and automatic GFCI tests are
enabled. The automatic test will happen within 7
days of the spa being installed and if successful will
not repeat. (If the automatic test fails it will repeat
after the spa is restarted.) GFCI Test will not appear
on the screen if it is not enabled. This screen allows
the GFCI to be tested manually from the panel and
can be used to reset the automatic test feature.
GFCI Test will not appear on the screen if it is not enabled. This
screen allows the GFCI to be tested manually from the panel
and can be used to reset the automatic test feature.