Balboa Water Group SpaTouch2, Руководство пользователя

Страница: 16 / 28

Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compatible with SpaTouch 1 & 2
16 03.17
Continued... Additional Settings
Auxiliary Panel(s)
Circulation Pump Modes
Some spas may be manufactured with Circ Pump settings that
allow programming filtration cycle duration. Some circ Modes
are pre-programmed to operate 24 hours a day and are not
programmable. Refer to the spa manufacturer’s documenta-
tion for any Circ Mode details.
Purge Cycles
In order to maintain sanitary conditions, as well as protect
against freezing, secondary water devices will purge water
from their respective plumbing by running briefly at the be-
ginning of each filter cycle. (Some systems will run a certain
number of purge cycles per day, independent of the number
of filter cycles per day. In this case, the purge cycles may not
coincide with the start of the filter cycle).
If the Filter Cycle 1 duration is set for 24 hours, enabling
Filter Cycle 2 will initiate a purge when Filter Cycle 2 is
programmed to begin.
The Meaning of Filter Cycles
1. The heating pump always runs during the filter cycle*
2. In Rest Mode, heating only occurs during the filter cycle
3. Purges happen at the start of each filter cycle
* For example, if your spa is set up for 24/hour circulation ex-
cept for shutting off when the water temperature is 3˚F/1.3˚C
above the set temperature, that shutoff does not occur dur-
ing filter cycles.
Light Cycle Option
If Light Cycle does not appear on the Settings Screen, the
Light Timer feature is not enabled by the manufacturer. The
Light Cycle Icon on the Settings Screen takes you to a screen
where you control the Light Cycle. When available, the Light
Timer is (“Disabled“) by default. Press “Disabled“ to change it
to “Enabled“ (ON). The settings can be edited the same way
that Filter Cycles are edited.
Specific Buttons for Specific Devices
If the spa has an Auxiliary Panel(s) installed, pressing buttons on
that panel will activate the device indicated for that button.
These dedicated buttons will operate just like the Spa Screen
buttons (see page 6) and the equipment will behave in the same
manner with each button press.
9:00
9:15
Disabled