16
Periodic Care & Cleaning of Burner System
This appliance will periodically require more detailed cleaning
after continued storage of 3 months or more. Periodically check
and clean burner/venturi tubes for insects and insect nests.
WARNING: A clogged tube can lead to a fire beneath the
appliance.
Keep the appliance area clear and free from combustible
materials, gasoline, and other flammable vapors and liquids.
Do not obstruct the flow of combustion and ventilation air.
Step 1
Working with a completely cooled appliance, turn off the
LP gas cylinder valve and disconnect the LP gas cylinder from
the appliance.
Step 2
Remove the Pizza Oven Box from the top of the
appliance.
Step 3
Locate the fasteners attaching the ignitors to the
Burners. Remove these fasteners [see Figure - 19].
Step 4
Locate the fasteners attaching the Burners to the Burner
Support Bar. Remove these fasteners [see Figure - 20].
Step 5
Lift the Burners up and towards the rear of the appliance
to remove, taking care not to damage the gas valves. The gas
valves are hidden between the firebox and control knobs. The
Burners should come out freely [see Figure - 21].
Step 6
Clean the outside surfaces with a stiff brush to remove
any debris or dirt. Inspect the Burners for any cracks or holes
that appear out of place. If cracks or holes are present replace
the Burner.
Step 7
Clean the inside of the Burners by inserting a stiff wire or
small bottle brush into the inlet portion of the Burner.
Compressed air may also be used to clean the burners by
blowing air into the inlet portion of the burner and the air will
flow out of the venturi holes.
Step 8
Replace the Burners by carefully inserting the Burners
back into the firebox, taking care to avoid damaging the gas
valves and orifices when installing.
Step 9.
After reassembling the appliance, perform a leak test
according to the instructions in this guide. Before placing the
Pizza Oven Box or other cooktop on the firebox inspect the
burner flames for proper combustion.
Step 10
Light the appliance according to the instructions
provided in this guide and look at the flame emitting from the
burners. A blue flame should emit consistently from each
venturi hole on the burners [see Figure - 22]. The tips of the
flame may occationaly flicker yellow while burning.
NOTE:
The
flame from the center burner will not be as great as the
perimeter burner.
Figure - 19
Figure - 20
Figure - 21
Figure - 22
Burner
Fasteners
Burners
Ignitor
Fasteners
Product Guide
