WARNING:
The pressure regulator and hose assembly supplied with the appliance must be used. Replacement
pressure regulators and hose assemblies shall be those specified by the appliance manufacturer.
Storage of this appliance indoors is permissible only if the cylinder is disconnected and removed
from the appliance.
Cylinders must be stored outdoors out of the reach of children and shall not be stored in a building,
garage, or any other enclosed area.
Only use this appliance outdoors in a well ventilated area.
Never operate this appliance within 10 ft (3.0 m) of any structure, combustible material or other gas
cylinder.
Do not use this appliance under overhead combustable construction.
Do not place or use this appliance on a combustable surface.
This appliance becomes hot, do not place on any surface which cannot withstand high
temperatures without deforming or being damaged.
This appliance is not to be installed in or on boats or recreational vehicles.
Failure to follow these instructions could result in fire, explosion or burn hazard which could cause
property damage, personal injury or death.
LP gas cylinder connection:
Step 1
Ensure the LP cylinder used conforms to the
requirements listed on the previous page. Also inspect the LP
gas cylinder valve rubber seal for deterioration such as
cracks, deformation or tears.
Step 2
Inspect the LP gas cylinder valve to ensure the threads
match that of the included hose and regulator.
Step 3
Ensure all the burner control knobs are in the OFF
position. See Figure - 1, Burner Control Knob.
Step 4
Thread the included hose and regulator onto the LP
gas cylinder. Turn the coupling fastener clockwise by hand
until it stops.
WARNING: Do not use tools to tighten the
coupling fastener.
Figure - 1
Burner Control Knob
10
Product Guide
Figure - 2
Hose and regulator attachment
Hose and
Regulator
LP Gas Cylinder
Coupling fastener
