7
5. Oven Cool Down Rotary Control
To cool down the oven to a lower desired temperature, follow the steps detailed below:
a. Open the oven door(s).
b. Turn selector switch to “Oven Cool Down” position. Fan will now operate and cool down the oven.
c. When the oven has cooled to the desired temperature, turn the selector switch to the “0” position.
!
!
NOTE:
Do not steam injection at temperatures below 275°F (135°C)
!
!
PROGRAMMING MENUS: MiniChef or FAST Option
See Set-Up & Operation Booklet for Programmable Oven Control with Bakers
Pride Software for Cyclone Series Convection Ovens supplied with this option.
e. Load the oven with the product to be cooked.
f.
Turn the timer knob to the desired bake time and timer will begin counting down.
g. When the timer reaches zero, a buzzer will sound.
h. Turn the timer knob to “0” position.
i.
Turn the thermostat knob to the desired holding temperature.
j.
Remove the product from the oven as desired.
4. Optional Steam Injection Rotary Control
a. The solenoid valve for steam injection is mounted behind the service panel on the right hand
side of the unit on COC-E and on back of the unit on CO11-E1.
b. The electronic timer is pre-set at the factory.
c. For steam injection, press the steam injection switch.