Page 23 of 59
Workstation Exit
Remove Cap from storage brackets, and ensure the handle is oriented in a vertical position
on the Cap. The Handle is designed with “indexing” detent features to help locate the
Handle relative to the Cap.
Drawing the handle into the Glove Port, replace the cap, using the location posts and
graphic to orient the Cap correctly on the Glove Port.
Note: Care should be taken to ensure that the Ezee-Sleeve material does not become
caught between the Cap and the Glove Port seal.
Figure 20: Glove port cap
Figure 21: Glove Port Locator
Rotating the Handle by 90 degrees to the horizontal position will now lock the Cap to the
Glove Port, allowing withdrawal of the users arm from the Ezee-Sleeve.
