Page 4 of 59
North American Region
This product is UL 61010-1 Listed, and CSA C22.2 No. 61010-1 under file number E113911.
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Precautions
The InvivO
2
has been tested and approved to EN61010-1, 61326-1, and 61326-2-6. This
means that the InvivO
2
meets or exceeds the requirements for General and IVD electrical
Laboratory equipment in terms of its levels of emitted electromagnetic (EM) radiation and
its susceptibility to electromagnetic radiation from other devices. It should be noted that
the InvivO
2
may be affected by high levels of stray EM radiation from other electronic
devices (even those which comply with relevant CISPR emission standards) that are being
used in close proximity to it.
WARNING: This system may cause radio interference or may disrupt the operation of
nearby equipment. It may be necessary to take mitigation measures, such as re-orienting
or relocating the equipment or shielding the location.
