Bajaj Dominar 400, Руководство по обслуживанию

Страница: 136 / 179

131
Manual de Servicio Bajaj Dominar 400
Sistema Eléctrico
Qué Hacer y Qué No Hacer
3
3 Wh
a
t t
o
d
o
• Always clean the command with a soft cloth.
• After washing the vehicle be sure to apply dry air in the switches before operating.
• Make sure the rear brake switch is free from dust, dirt and mud.
• Always make sure the caps of the switches clutch, front brake and rear brake are intact.
• Always apply WD-40 to find sticky switches.
7
7 Wh
a
t
no
t t
o
d
o
•• Not directly apply pressurized water control switches. • Do not lubricate electrical
switches with oil or grease. • Not on setting the switches.
• During the warranty period do not disassemble the control commands.
• Do not add extra electrical loads, such as: music speakers, additional speakers, buzzers,
etc.
because it will reduce the life of the switch and battery.
• Do not alter the spring rear brake switch.
• Do not operate the switches immediately after washing.
Control Commands
7 Wh
a
t
no
t t
o
d
o
• Check that all bulbs are firmly placed in the socket.
• Make sure all screws socket of bulbs are intact.
• Make sure the reflector / glass headlight, rear lamp, lights
directional are intact.
• Periodically check the DC voltage regulator output. Make sure the voltage is within
the specified
limits.
• Check all connections and cables of the bulbs are in good condition.
LUCES
3
Wh
a
t t
o
d
o
• Do not install battery lower / higher capacity than recommended.
• While the vehicle is cleaned not inject pressurized water directly to the headlamp, rear
lamp,
indicators.
• Do not drive with activated brakes.
• Do not start the vehicle with the light switch in position.
Sistema Eléctrico