Bajaj Auto Dominar 400, Руководство пользователя

Страница: 39 / 40

Non-use maintenance is necessary if a vehicle
remains off road for a longer duration (more
than 15 days**). The correct and careful non-
use maintenance carried out before storing the
vehicle will prevent the vehicle from rusting and
from such other non-operational damages like
fire hazards.
• Clean the entire vehicle thoroughly.
• Empty the fuel from the fuel tank and (if fuel
is left in for a longer time, the fuel will break
and gummy substance could clog the
carburettor).
• Remove spark plug & put several drops of
Engine oil into the cylinder. Self start engine
over slowly a few times to coat cylinder wall
with oil & install back spark plug.
• Set the vehicle on a box or a stand so that
both wheels are raised off the ground.
• Spray oil on all unpainted metal surfaces to
prevent rusting. Avoid getting oil on rubber
parts or brake liners.
• Cover entire vehicle neatly. Make sure that
storage area is well ventilated & free from
any source of flames or spark.
• Fill 10% excess air pressure in both wheels.
• Do not apply oil on front brake disc, to
prevent rusting. If the front brake disc rusts
during storage, do not attempt to clean it
with soap water. The rust will go off
automatically during first few application of
brake.
a. Remove battery and keep it on wooden
plank, in properly ventilated area.
b. Before taking the vehicle for use.
• Get the battery recharged from the
Authorised Service Center / Battery Dealer.
• Apply petroleum jelly on terminals. (applicable
to certain models).
** For Battery
• Clean the vehicle
• Make sure the spark plug is tight.
• Fill the fuel tank with fuel.
• Change the engine oil.
• Check all the points listed in the
Daily Safety Checks section.
• Check and inflate tyres to proper tyre pressure.
Preparation for regular use after storage
Non-Use Maintenance
35