Bajaj Auto Dominar 400, Руководство пользователя

Страница: 22 / 40

How to Ride
Your Bike
1. Starting The Engine
• Turn ignition switch key to ‘ ’ position.
• Put kill switch in‘ ’position.
• Confirm that transmission is in neutral / press the clutch
lever if transmission is in gear.
• Keep throttle completely closed & press starter button,
• Release starter button as soon as engine starts.
Wait 15 sec. between each operation of the starter
which will facilitate battery to recover.
The motorcycle is equipped with a Clutch switch. This switch
ensures that engine does not start if the transmission is
in gear. However, the engine can be started in any gear if
the clutch lever is pressed.
NOTE
Incase of battery discharged
condition, vehicle can be
started by pushing it.
NOTE
Caution: Do not operate the starter continuously for more
than 5 seconds otherwise battery would get discharged.
!
2. Shifting Gears
• Close throttle & depress the clutch lever.
• Shift into next higher or lower gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
1
N
2
3
4
5
6
Gear shifting pattern
18
Gear
shifting
Lever
3. Moving Off
• Check that side stand is up / retracted.
• De-press the clutch lever.
st
• Shift into 1 gear.
• Open the throttle and release the clutch
lever slowly and simultaneously.
• As the clutch starts to engage, open the
throttle a little more, giving the engine
just enough rpm to keep it from stalling.