16
CHECk-UPS, ADJUSTMENT AND MANTENANCE
Checking the Oil
Check the engine oil each time prior to operating the dirt bike.
The oil level should be between the upper and lower lines of the oil sight gauge located on
the right cover of the crankcase. The level can also be checked on the dip stick.
1. Set the motorcycle on level ground, look at the sight gauge for current oil level. Screw
off the oil gage plug, wipe the oil gage rod clean and then insert the gage plug into the
crankcase again to check the oil level. There is no need to screw the oil gage plug into its
hole in the crankcase.
2. Add lubricating oil up to the upper line when needed, but do not overfill.
3. Finally screw on the oil gage plug tightly.
Lubricating Oil Recommended
The lubricating oil is an important factor affecting the performance and service life of
the engine. Please refer to the chart for the correct grade of engine oil based on the
environmental conditions in your area. Do not use any other type of oil other than what is
recommended in the chart. DO NOT MX OL WTH THE GASOLNE.
Lubricating oils of different
viscosity shall be employed
in different regions and at
different temperatures.
MACHNE
OL
TEMP.
°C
°F
-30
-22
40
104
-20
-4
-10
14
0
32
10
50
20
68
30
86
20W-50
5W-40 15W-50
10W-40 10W-50
10W-30
CAUTON
Never start the engine when there is
insufficient lubricating oil. Otherwise, it
will cause harm to the engine.
Oil sight gauge
Oil fill cap
and dip stick
