19
ADJUSTNG THE THROTTLE CABLE
Make sure the hrottle works normally.
Check if the throttle twist grip has the required free operating movement.
The required free operating movement: 2-6mm (.078” - .24”) f the grip cannot be moved
freely, turn the adjusting nut located on top of the throttle twist grip to ensure proper
operating movement.
After adjustment, start the engine and check for the operating movement again. Repeat the
adjustment if necessary until the desired operating movement is obtained.
ADJUSTNG THE CARBURETOR
Adjusting procedures of idling speed:
1. Support the vehicle by a stand.
2. Adjust the idling speed by the throttle stop screw to 1500 ± 150rpm.
CAUTON
Do not try to correct a malfunctioning carburetor by adjusting the idling speed. f
the carburetor is not functioning properly, it should be repaired by a service center.
Adjust idling speed only when the engine is warmed up or 10 minutes after operation.
dling speed adjusting screw
