15
How to nitially Charge the battery:
1. Connect the red positive (+) cable to the red positive (+)
pole of the battery.
(see figure 24)
2. Connect the black negative (-) cable to the black negative
(-) pole of the battery. (see figure 25)
Note: The red positive (+) cable has a larger diameter than
the black negative y cable.
3. Charging rate: Charge battery @ 0.7 Amps for
5 ~ 10 hours.
• After charging is complete, press down firmly with
both hands to seat the caps. (Do not pound or
hammer.) The battery is now sealed. (see figure 26 )
• Remove side cowling and battery compartment cover
from dirt bike (See figure 27)
• nstall battery into battery compartment. The battery
terminals should be facing the front (see figure 28)
• Once battery is firmly seated in battery compartment
attach the red positive wire to the red positive terminal
on the battery. (see figure 28)
• Then attach the black negative wire to the black
negative terminal on the battery.
(see figure 28)
WARNNG
NEVER REMOVE THE STRP OF CAPS NOR ADD ANY
WATER OR ELECTROLYTE.
Figure 24
Figure 25
Figure 26
Figure 27
Red +
Black -
Battery bracket
Battery
Compartment
Side Cowling
Figure 28
