I-E96-420A
Preface
The NIAC02 Analog Input Calibration Module is required to
simultaneously calibrate all eight inputs for the IMASM02 Ana-
log Input Slave Module interfaced to an NIAI02 termination
module. Calibration voltages pass from the IMAMM02 and
IMAMM03 Analog Master Modules or an external millivolt cali-
bration source to the IMASM02 slave module.
This manual explains how to install and use the NIAC02 mod-
ule on the INFI 90
®
system. It contains sections that describe
setup and cabling. The appendix contains information about
the IMASM02 module.
® Registered trademark of Elsag Bailey Process Automation.
