Bailey Approach SE, Руководство пользователя

Страница: 83 / 96

7-36
FITTED EQUIPMENT
plunger while emptying the tank. After
emptying, rinse the tank and blade
thoroughly with water.
Do not vigorously shake the tank or use high
pressure water cleaners. This may cause
damage to the tank’s interior. The vent
plunger should only be depressed once the
emptying spout is pointing downwards.
Prepare the toilet for re-use if required. Slide
the Waste Holding Tank into the toilet and
close the access door.
Emptying with Optional Features
Waste Holding Tank Multi-Level Indicator:
The lower lamp indicates that the Waste
Holding Tank is almost empty; the middle
lamp indicates that it is more than half full;
when the upper lamp lights up, the tank
needs emptying as it can only take 2 - 3
further uses.
The Waste Holding Tank Level Indicator will
flash when the holding tank is not present. In
this case the toilet will not flush.
Cleaning and Maintenance
The toilet should be cleaned and maintained
regularly, depending on the amount of use.
To clean Thetford toilets, we advise using
water and Thetford Bathroom Cleaner. Never
use bleach, vinegar or other powerful
household cleaners that contain these
substances. These may cause permanent
damage to the seals and other toilet
components.
Toilet Bowl
• Squirt Thetford Bathroom Cleaner into
the toilet bowl.
• Flush the toilet bowl with water and wipe
down the rest of the toilet with a damp
cloth.
• Clean seat and lid. The seat and lid can
easily be removed: Lift the seat and lid
assembly and pull the round pins (inside
the assembly) outwards from the pin
holes. After cleaning, replace the seat
and lid by positioning the round pins in
front of the pin holes and push the lid and
seat downwards.
• To keep your flush water fresh and to
prevent deposits forming in your toilet
bowl, add a correct dosage of Aqua
Rinse in your flush water tank.
Tip! For a really shining toilet, dry with
a soft dry cloth after cleaning.
Waste Holding Tank
To keep your Waste Holding Tank fresh and
clean, Thetford has developed a number of
different toilet fluids. Thetford toilet fluids
suppress smells, reduce formation of gas,
promote breakdown of toilet waste and
increase the life span of a mobile toilet.
We advise a thorough cleaning of the Waste
Holding Tank once each season.
Next to using the Thetford’s Cassette Tank
Cleaner, which is the powerful cleaning agent
for the periodical cleaning of the waste
Holding Tank of your toilet we suggest the
following:
• Remove the removable mechanism from
the Waste Holding Tank by turning it anti-
clockwise and rinse it under a tap.
• Remove the cover plate from the
Automatic Pressure Release Vent by
prising it up using a small screwdriver.
Use one hand to push the Automatic
Pressure Release Vent open while
holding the float of the Automatic
Pressure Release Vent on the inside of
the tank with the other hand. Push the
float upwards, turn it 180 degrees and
remove it from below. Remove the rubber
seal underneath the float. Rinse the float
and rubber seal under a tap. Replace the
rubber seal and float for the Automatic
Pressure Release Vent using the same
method in reverse.
• The rubber seals in the toilet (the lip seal,
the mechanism seal, the automatic
pressure release vent seal and the cap
seal) should be regularly cleaned with
water and treated with Thetford High
Grade Seal Lubricant. This will ensure
that the seals remain flexible and in good
condition. If the toilet is not to be used for
any length of time, it is important to treat
the seals with Thetford High Grade Seal
Lubricant after cleaning. Never use