COMPONENT DESCRIPTION AND REPLACEMENT
OPERATOR INTERFACE DEVICES
6 - 16
I-E96-192-5A
®
3. Remove the four screws securing the ADP panel to the con-
sole. Remove the ADP panel.
4. Refer to
for address switch settings for new ADP
panel.
NOTE: The IIADP01 tabletop panel can be added to an IIOIC422
console in addition to the IIADP02.
IIOIC423 ENVIRONMENTAL MODEL
The environmental model comes with the NADS03 assembly
mounted in the cabinet (Figure
). To remove the NADS03
assembly:
1. Turn off the main circuit breaker on the power entry panel.
Check the power indicator to see if power is removed.
Open the
rear doors and disconnect all the cables.
2. Remove the screws securing the sealing ring to the cabinet.
3. Once the sealing ring is removed, remove the four screws
securing the NADS03 to the cabinet.
4. Remove the NADS03 panel.
5. Refer to
for address switch settings for new
NADS03 panel.
6. Install the new NADS03 panel into the cabinet.
7. Install the sealing ring and ten screws to secure the ring to
the cabinet. Tighten the screws.
IIOIC424 PANEL MOUNTED MODEL
The panel mounted model does not come with an ADP panel,
but the IIADP01 tabletop display or the IIADP02 display can be
added to the assembly as an option. Refer to
for
installation information and cabling/connection information.
1. Turn off the main circuit breaker on the power entry panel.
Check the power indicator to see if power is removed.
2. If the optional IIADP01 tabletop unit is added, the cable
connects to AUX PORT of the keyboard interface board. To
remove, unplug the cable.
3. If the optional IIADP02 is added to the assembly and
mounted in a panel, remove any hardware that was required to
mount the ADP in the panel.
4. Refer to
for switch settings for ADP panel.