INSTALLATION
AC OUTLETS
I-E96-192-5A
3 - 5
Over-current protection provided for the AC distribution must
be sized to allow for the inrush current required by the OIC
hardware. Refer to the specifications in
for the peak
inrush current and duration for the OIC console.
For more information on power wiring, grounding, line condi-
tioning and EMI (electromagnetic interference), refer to the
Site Planning and Preparation
instruction.
AC OUTLETS
The number of AC outlets varies according to the OIC42 model
being used.
NOTE: Do not connect motors, lights or test equipment to the AC
outlets. Electrical noise may cause data to be lost or changed.
OIC INSTALLATION
This section contains the installation and setup instructions
for the IIOIC421 tabletop, IIOIC422 console, IIOIC423 environ-
mental cabinet and IIOIC424 panel mounted auxiliary termi-
nals. Follow all cautions and warnings.
The OIC console is internally wired when it is shipped. Con-
nect the communication loop cables, AC power and any
peripheral devices. Peripheral devices connect to the front of
the power entry panel, or to the keyboard interface assembly
front panel (IIOIC421 tabletop). Table
contains the color
codes for the wiring in the OIC console.
CAUTION
Remove power from all equipment and the console before
installing or removing peripheral equipment. Equipment dam-
age may result.
ATTENTION
Coupez l´alimentation des périphériques et de la console avant
d´installer ou de retirer des périphériques, sinon l´équipment
risque de subir des dommages.
Table 3-1. OIC Wiring Color Codes
Color
Function
Brown
AC hot (inside PEP chassis only)
Blue
AC neutral
Green/Yellow AC common
Brown
+5 VDC
White/Green
DC common
Violet
-12 VDC
White/Violet
+12 VDC
