Baileigh WL-1220VS, Руководство оператора

Страница: 29 / 52

26
26
Outboard Turning
This lathe is equipped with a detachable outboard
turning attachment. This provides additional clearance
for a greater variety of turning tasks.
Follow the Faceplate mounting instructions to mount a
workpiece to the spindle handwheel for outboard
turning. The method for attaching a workpiece to the
spindle is the same for both turning methods.
1.
Unplug or disconnect lathe from power source
and lock out power.
2. Prepare the outboard turning attachment by
thoroughly cleaning it to remove debris or buildup.
3. Release the tool rest base release lever (A) so the
tool rest moves freely, then rotate and position the
tool rest so the entire base sits on the lathe bed.
This will prevent the tool rest from falling when the
lock nut is removed.
4. Loosen and remove the lock nut and clamp
washer (B) from under the lathe bed. Fig. 21.
5. Lift the tool rest from the lathe bed and position it
on the outboard tool rest mount so that the clamp
shaft protrudes through the slot.
6. Install the clamp washer and lock nut (B) onto the
clamp shaft. Fig. 22.
7. Tighten the lock nut so the release handle will
clamp the tool rest securely when locked but still
allow easy movement when released.
Fig 20
A
B
Fig 21
Fig 22
B