background image

 

 

WARRANTY 

9.1 

The Company warrants that (subject to the other provisions of these Conditions) upon delivery, and for a period of 12 months  from 
the date of delivery, the Goods will be of satisfactory quality within the meaning of the Sale of Goods Act 1994. Warranty provisions 
are  strictly  at  the  determination  of the  Company  on  a case  by case  basis.  The  Company’s  determinations  regarding  a  warranty 
claim are final. 

9.2 

The Company shall not be liable for a breach of the warranty in Condition 9.1 unless: 

9.2.1 

the  Buyer  gives  written  notice  of  the  defect  to  the  Company,  and  (if  the  defect  is  as  a  result  of  damage  in  transit)  to  the 
carrier, within a reasonable amount of time when the Buyer discovers or ought to have discovered the defect; and 

9.2.2 

the Company is given a reasonable opportunity after receiving the notice to examine such Goods and the Buyer (if asked to 
do so by the Company) returns such Goods to the Company's place of business at the Buyer's expense for the examination 
to take place there. 

9.3 

The Company shall not be liable for a breach of the warranty in Condition 9.1 if: 

9.3.1 

the Buyer makes any further use of such Goods after giving such notice; or 

9.3.2 

the defect arises because the Buyer failed to follow the Company’s oral or written instructions as to the storage, installation, 
commissioning, use or maintenance of the Goods; or 

9.3.3 

the defect arises as a result of ordinary wear and tear; or 

9.3.4 

the Buyer alters or repairs such Goods without the written consent of the Company. 

9.4 

The following are expressly excluded from the warranty in Condition 9.1: 

9.4.1 

die sets, tooling and saw blades; and 

9.4.2 

machine maintenance, adjustment and set ups. 

9.5 

Subject to Conditions 9.2 and 9.3, if any of the Goods do not conform with the warranty in Condition 9.1 the Company shall at its 
option repair or replace such Goods (or the defective part) or refund the price of such Goods at the pro rata Contract rate provided 
that,  if  the  Company  so  requests,  the  Buyer  shall,  at  the  Buyer's  expense,  return  the  Goods  or  the  part  of  such  Goods  which  is 
defective to the Company. 

9.6 

If the Company complies with Condition 9.4 it shall have no further liability for a breach of the warranty in Condition 9.1 in respect 
of such Goods. 

9.7 

Any Goods which have been replaced will belong to the Company and any repaired or replacement Goods will be guaranteed on 
these terms for the unexpired portion of the 12 month period. 

9.8 

All work carried out under the warranty contained in Condition 9.1 must be approved by the Company. 

9.9 

All  electrical  components  and  gearboxes  carry  a  one-year  replacement  warranty  from  the  manufacturer.  This  warranty  does  not 
include labour or shipping costs. 

10 

RETURNS 

10.1  The  Buyer  shall  not  be  entitled  to  cancel  any  order  or  Contract  or  return  any  goods  without  the  prior  written  approval  of  the 

Company. 

10.2  Special orders cannot be cancelled under any circumstances. 
10.3  If the Company agrees to accept the return of any Goods it shall be on terms that 

a) 

They are returned at the Buyer’s expense to the Company within 30 days of delivery 

b) 

They are received by the Company in “as new” condition without any damage or use 

c)  Any refund wil

l be subject to a 15% “restocking charge” 

and such other terms as the Company may impose. 

11 

LIMITATION OF LIABILITY 

11.1  Subject to  Condition  9, the following  provisions  of  this  Condition  10 set  out  the  entire financial liability  of  the  Company  (including 

any liability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of: 

11.1.1 

any breach of these Conditions; and 

11.1.2 

any  representation,  statement  or  tortious  act  or  omission  including  negligence  arising  under  or  in  connection  with  the 
Contract. 

11.2  All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the 

Sale of Goods Act 1979) are, to the fullest extent permitted by law, excluded from the Contract. 

11.3  Nothing in these Conditions excludes or limits the liability of the Company for death or personal injury caused by the Compan

y’s 

negligence or for fraudulent misrepresentation. 

(THE BUYER’S ATTENTION IS DRAWN TO THE PROVISIONS OF CONDITION 11.4 BELOW) 

11.4  Subject to Conditions 11.2 and 11.3: 

11.4.1 

the  Company’s  total  liability  in  contract,  tort  (including  negligence  or  breach  of  statutory  duty),  misrepresentation  or 
otherwise,  arising  in  connection  with the  performance  or  contemplated  performance  of  this  Contract shall  be  limited to the 
invoiced amount per each and every individual transaction; and 

11.4.2 

the Company shall not be liable to the Buyer for any indirect or consequential loss or damage (whether for loss of profit, loss 
of  business,  depletion  of  goodwill  or  otherwise),  costs,  expenses  or  other  claims  for  consequential  compensation 
whatsoever (howsoever caused) which arise out of or in connection with the Contract. 

12 

INTELLECTUAL PROPERTY 

12.1  The property and any copyright or other intellectual property rights in: 

12.1.1 

any Buyer Materials shall belong to the Buyer; 

12.1.2 

any  Company  Materials  shall,  unless  otherwise  agreed  in  writing  between  the  Buyer  and  the  Company,  belong  to  the 
Company,  subject  only  to  a  license  in  favor  of  the  Buyer  to  use  the  Company  Materials  for  the  purposes  of  receiving  the 
Goods. 

 
 

Содержание TN-800













































Отзывы: