Baileigh TN-800, Руководство оператора

Страница: 25 / 44

23
23
Repeat Notching
1. For repeat notching perform the above steps
and document the number on the counter.
This number can also be used to make
precise notches to the depth desired.
The calibration of the counter is:
Counter display
Actual distance in
inches
0000.0 0.000
0001.0 0.100
0002.0 0.200
Material Removal
1. After the desired notch depth is reached, activate the stop switch.
2. Make sure the spindle has stopped completely before removing completed part and installing
new material.
Off-Center Notching
For off-center notching use the vise jaw adjustment screw to
adjust the height of the vise jaw to the offset needed.