background image

 

 

NON-DELIVERY 

5.1 

The quantity of any consignment of Goods as recorded by the Company upon dispatch 

from the Company’s place of business shall 

be conclusive evidence of the quantity received by the Buyer on delivery unless the Buyer can provide conclusive evidence proving 
the contrary. 

5.2 

The Company shall not be liable for any non-delivery of G

oods (even if caused by the Company’s negligence) unless written notice 

is given to the Company within [7] days of the date when the Goods would in the ordinary course of events have been received. 

5.3 

Any liability of the Company for non-delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing 
a credit note at the pro rata Contract rate against any invoice raised for such Goods. 

RISK/TITLE 

6.1 

The Goods are at the risk of the Buyer from the time of delivery. 

6.2 

Ownership of the Goods shall not pass to the Buyer until the Company has received in full (in cash or cleared funds) all sums due to 
it in respect of: 

6.2.1 

the Goods; and 

6.2.2 

all other sums which are or which become due to the Company from the Buyer on any account. 

6.3 

Until ownership of the Goods has passed to the Buyer, the Buyer must: 

6.3.1 

hold the Goods on a fiduciary basis as the Company’s bailee; 

6.3.2 

store the Goods (at no cost to the Company) separately from all other goods of the Buyer or any third party in such a way that 
they remain readily identifiable as the Company’s property; 

6.3.3 

not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods; 

6.3.4 

maintain  the  Goods  in  satisfactory  condition  insured  on  the 

Company’s  behalf  for  their  full  price  against  all  risks  to  the 

reasonable satisfaction of the Company. On request the Buyer shall produce the policy of insurance to the Company; and 

6.3.5 

hold the proceeds of the insurance referred to in Condition 6.3.4 on trust for the Company and not mix them with any other 
money, nor pay the proceeds into an overdrawn bank account. 

6.4 

The Buyer may resell the Goods before ownership has passed to it solely on the following conditions: 

6.4.1 

any sale shall be effected in 

the ordinary course of the Buyer’s business at full market value; and 

6.4.2 

any such sale shall be a sale of the Company’s property on the Buyer’s own behalf and the Buyer shall deal as principal when 
making such a sale. 

6.5 

The Buyer’s right to possession of the Goods shall terminate immediately if: 

6.5.1 

the Buyer has a bankruptcy order made against him or makes an arrangement or composition with his creditors, or otherwise 
takes the benefit of any Act for the time being in force for the relief of insolvent debtors, or (being a body corporate) convenes 
a  meeting  of  creditors  (whether  formal  or  informal),  or  enters  into  liquidation  (whether  voluntary  or  compulsory)  except  a 
solvent  voluntary  liquidation  for  the  purpose  only  of  reconstruction  or  amalgamation,  or  has  a  receiver  and/or  manager, 
administrator or administrative receiver appointed of its undertaking or any part thereof, or a resolution is passed or a petition 
presented to any court for the winding up of the Buyer or for the granting of an administration order in respect of the Buyer, or 
any proceedings are commenced relating to the insolvency or possible insolvency of the Buyer; or 

6.5.2 

the  Buyer  suffers  or  allows  any  execution,  whether  legal  or  equitable,  to  be  levied  on  his/its  property  or  obtained  against 
him/it, or fails to observe/perform any of his/its obligations under the Contract or any other contract between the Company and 
the Buyer, or is unable to pay its debts within the meaning of section 123 of the Insolvency Act 1986 or the Buyer ceases to 
trade; or 

6.5.3 

the Buyer encumbers or in any way charges any of the Goods. 

6.6 

The  Company  shall  be  entitled  to  recover  payment  for  the  Goods  notwithstanding  that  ownership  of  any  of  the  Goods  has  not 
passed from the Company. 

6.7 

The  Buyer  grants  the  Company,  its  agents  and  employees  an  irrevocable  license  at  any  time  to  enter  any  premises  where  the 
Goods are or may be stored in order to inspect them, or, where the Buyer’s right to possession has terminated, to recover them. 

PRICE 

7.1 

The price for the Goods shall be the price set out in the 

Company’s estimate/quotation. All estimates/quotes are good for 30 days 

from the date on the top of the estimate/quote. 

7.2 

The price for the Goods shall be exclusive of any value added tax and all costs or charges in relation to loading, unloading, carriage 
and insurance all of which amounts the Buyer will pay in addition when it is due to pay for the Goods. 

PAYMENT 

8.1 

Payment  of  the  price  for  the  Goods  is  due  and  payable  before  shipment  of  the  goods  occurs  unless  otherwise  negotiated  by  the 
Company and the customer. 

8.2 

Time for payment shall be of the essence. 

8.3 

No payment shall be deemed to have been received until the Company has received cleared funds. 

8.4 

All payments payable to the Company under the Contract shall become due immediately upon termination of this Contract despite 
any other provision. 

8.5 

The Buyer shall make all payments due under the Contract without any deduction whether by way of set-off, counterclaim, discount, 
abatement  or  otherwise  unless  the  Buyer  has  a  valid  court  order  requiring  an  amount  equal  to  such  deduction  to  be  paid  by  the 
Company to the Buyer. 

8.6 

If the Buyer fails to pay the Company any sum due pursuant to the Contract the Buyer will be liable to pay interest to the  Company 
on  such  sum  from  the  due  date  for  payment  at  the  annual  rate  of  10%  above  the  base  lending  rate  from  time  to  time  of  LIBOR, 
accruing on a daily basis until payment is made, whether before or after any judgment. 

8.7 

The  Company  reserves  the  right  to  claim  interest  and  fixed  sum  compensation  under  the  Late  Payment  of  Commercial  Debts 
(Interest) Act 1998. 

 
 

Содержание TN-800













































Отзывы: