Baileigh JP-1250, Руководство оператора

Страница: 28 / 64

25
25
Determining Correct Table Height
When you receive the jointer, the knives have been pre-set at the factory. However, the height
and parallelism of the knives with the outfeed table should be checked, and any needed
adjustments made, before putting the jointer into operation.
The outfeed table and cutterhead is correctly adjusted when the blades are parallel to the
outfeed table. This adjustment does not normally change over time, however it should be
checked whenever changing cutter blades or if the cutter head has been removed for service for
any reason.
Outfeed Table Too High
–
If the outfeed table is too
high, a curved finished surface results.
Outfeed Table Too Low
–
If the outfeed table is too
low, the work will have a gouge, or snipe, at the end of
the cut.
Outfeed Table At Correct Setting
–
This image
illustrates the correct setting of outfeed table level with
the knives. The workpiece will rest firmly on both
tables with no open space under the finished cut.