Baileigh JP-1250, Руководство оператора

Страница: 15 / 64

12
12
TRANSPORTING AND LIFTING
Follow these guidelines when lifting:

Always lift and carry the machine with straps on each end for balance.

Use straps capable of lifting 1.5 to 2 times the weight of the machine.

Take proper precautions for handling and lifting.

Check if the load is properly balanced by lifting it an inch or two.

Lift the machine, avoiding sudden accelerations or quick changes of direction.

Locate the machine where it is to be installed, and lower slowly until it touches the floor.
Use Lift Truck To Transport Machine

Place the wooden crate in the middle of the forks and keep at least 2” (50.8mm) distance
between the front of the forks and the wooden crate to avoid the case collapsing and secure
safe transport.

The lift truck must be able to lift at least 1.5
– 2 times the machines gross weight.

Make sure the machine is balanced. While transporting, avoid rough or jerky motion, and
maintain at least 6 ft. (2m) safe clearance zone around the transport area.
Use Gantry Or Crane To Move Machine

Lift the machine from the base, NEVER use the jointer
tables as lifting point.

When lifting, verify that the lifting straps are long enough
to maintain a full spread toward the outer edges of the
machine as well as toward the lift hook to allow the straps
to lift as straight as possible.

DO NOT allow the lifting straps to pinch or bend lite
weight components.

Protect the lifting straps from sharp edges and corners
that may wear or cut on the lifting straps.
CAUTION:
Lifting and carrying operations should be carried out by skilled
workers, such as a truck operator, crane operator, etc. If a crane is used to lift the
machine, attach the lifting chain carefully, making sure the machine is well balanced.
Choose a location that will keep the machine free from vibration and dust from other
machinery. Keep in mind that having a large clearance area around the machine is
important for safe and efficient working conditions.