Baileigh IP-208, Руководство оператора

Страница: 13 / 44

11
11
INSTALLATION and ASSEMBLY
IMPORTANT:
Consider the following when looking for a suitable location to place the machine:

Overall weight of the machine.

Weight of material being processed.

Sizes of material to be processed through the machine.

Space needed for auxiliary stands, work tables, or other machinery.

Clearance from walls and other obstacles.

Maintain an adequate working area around the machine for safety.

Have the work area well illuminated with proper lighting.

Keep the floor free of oil and make sure it is not slippery.

Remove scrap and waste materials regularly, and make sure the work area is free from
obstructing objects.

If long lengths of material are to be fed into the machine, make sure that they are safely
supported and will not extend into any aisles.
The machine should be sited on a level, concrete floor. The accuracy of any machine depends
on the precise placement of it to the mounting surface. Locate the planer in an area that is level
and provides a solid foundation. Make sure that any potential kickback is not in line with aisles,
doorways, wash stations or other work areas.
Place shims under the four feet mounted in the base
as required for leveling.
There are four lifting handles (A) hidden in the bed of
the planer table. Pull the handles out for use and push
them down otherwise.
WARNING:
FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE
TO THE POWER SOURCE UNTIL THE MACHINE IS COMPLETELY ASSEMBLED AND
YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION MANUAL.
WARNING:
Before operating; make sure it is positioned firmly on a solid
level floor. If it tips over on you, it could cause severe injury or death.
Fig. 1