Baileigh IP-208, Руководство оператора

Страница: 24 / 44

22
22
ADJUSTING SPRING TENSION OF FEED ROLLER
The infeed roller (A) and the outfeed roller (B) are two
of the major parts of automatic transmitting of planer.
(Fig. 20).
To control pressure, spring tensions are used.
Adjusting Infeed and Outfeed Roller
Before starting with the adjustment, you must check the position of the cutting head. You will
need;

Thickness gauge 0.5m/m

Home made gauge block
Figure 21 shows the relative dimensions of the Cutter Head and Roller assembly. (Fig. 21).
Fig. 20
Fig. 21