15
15
To avoid table surface deformation, note the following points:
o
It is better to be mainly used for tack and spot welding on the platform.
o
If full welding is needed, Use blocks top raise the material off of the surface to avoid
deformation caused by high temperature.
o
Always check the forces of supporting legs. Level the table as require.
Table Top
Table top has a perforated grid plate with D28 mounting holes precisely laid out on a 100mm x
100mm grid pattern. These holes can be used for various positioning module and fixtures.
Basic Parts
The table comes with the legs. The clamping and fixturing devises are
optional items sold as
an accessory package
(shown below). A wide variety of clamping and fixturing devises are
available at most welding supply houses.
Note: Optional Accessory Package Shown. Sold Separately
